860 DSPi Firmware v 12.2.15.2

For assistance with any installation, please call Trilithic support at 1-800-344-2412.

This firmware is appropriate for most users, but some companies have specific update policies. In some cases the standard firmware may render certain test functions inoperable. Please contact your manager before updating your firmware.

WARNING: If you are upgrading from firmware between v 6.2.1.1 to v 10.4.1.2 you must upgrade to 860 DSPi Firmware v 11.4.1.2 first.

v 12.2.15.2

• Added Modem channel explanation to type in info menu
• Added option to save and restore presets in the spectrum menu
• Added Burst mode to SSR
• Fixed bug in CM through that kept user from being able to toggle downstream /upstream
• SSR Added reference for bottom graph
• Added Downstream DOCSIS Line to QAM Equalizer
• Added a shortcut for downstream frequencies to be accessed from navigation menu
• Added 2,5,10 db/div in SSR mode
• Added Spectrum .pres to file filter in explorer menu

v 11.12.8.2

• Improved speed upon entering the UP-LD menu
• Improved WiFi login, allow for Com net speed to be set at 100 Mbps
• Reduced DOCSIS 3 8x4 modem booth time by five seconds
• Added DOCSIS 3 8x4 modem firmware version on CMStat menu
• Added DOCSIS 3 8x4 dual modem support

v 11.10.10.2

• New 8x4 DOCSIS modem support.
• Modem login bypass - allows for technicians to press "Enter" to bypass full registration and show modem statistics.
• Upstream EQ - 8x4 can now show pre-equalized taps, group delay and in-channel frequency response.
• Autotest BER update - If you do not check BER in the channel plans, no readings on BER will be taken.

v 11.8.25.2

• WARNING: If you are upgrading from firmware between v 6.2.1.1 to v 10.4.1.2 you must upgrade to 860 DSPi Firmware v 11.4.1.2 first and then upgrade to v 11.8.25.2.  The older firmware in this range has a limitation on how big of a flash memory that they can upgrade and this limitation was removed in the v 11.x.x.x releases of firmware.  Once you have upgraded to a firmware version from v 11.x.x.x, you will not need to do this double step upgrade again.  This applies to WorkBench, TDM and the DOS Console version of the firmwares.
• Increased Long Term BER to 24 Hours as a test, Workbench also supports this functionality.
• Changed spoofing to not allow invalid characters.
• Added some IPv4/IPv6 code, allows the modem to go into IPv4 or IPv6 mode.
• Added ability to force 10Mbps, 100Mbps, or Auto Negotiate for CI-4 and CI-5 support.
• Added code to auto detect 85 MHz or 65 MHz boards.
• Added Chinese Icon support.
• New Spectrum Detector mode – “Burst Detector” available for use.

v 11.4.1.2

• Store the network connectivity mode in CMSTat macro in case you wish to remote view cable modem macro logs over the RJ-45 connection
• QAM macro speed enhanced when channel is below -20 dBmV
• Added dynamic naming to tasks in the task manager for maintenance personnel
• Forced scan mode tilt compensation to use Tilt menu (High / Low) channel selection
• Added Low and High tilt channel labels to scan mode when tilt compensated scan is activated
• Lockout changes in operator / new technician when setup is locked out
• Added parsing to operator name to allow the tech ID number to be included in the field and displayed on boot up
• Added the "X" display and ingress check in RSVP mode to help users determine if carriers are interfered with by ingress
• Added "Outlet" as a selection in the location menu