860 DSP
Portable Analyzer
This multifunction analyzer takes advantage of digital signal processing techniques to perform transmission and signal quality tests, on both analog and digital signals.
- 860 DSP and 860 DSPi Modes and Options
- 860 DSP Display in Extreme Temperatures
- 860 DSP HUM
- 860 DSP Zero Span
- 860 DSPi BER User Guide
- 860 DSPi Cable Modem Login
- 860 DSPi CSO/CTB
- 860 DSPi Distance to Fault
- 860 DSPi Error Vector Spectrum
- 860 DSPi Firmware Upgrade Instructions
- 860 DSPi High Speed Throughput
- 860 DSPi Macro Results
- 860 DSPi Ping Testing
- 860 DSPi Pocket DQ and PP-30
- 860 DSPi QAM
- 860 DSPi QAM Source
- 860 DSPi Secur860Link and Instrument Fingerprint
- 860 DSPi SSL Firmware
- 860 DSPi Trace Route
- 860 DSPi Unsolicited Grant Service
- 860 DSPi Upstream Level Measurement
- 860 DSPi Upstream TraffiControl
- 860 DSPi VITS
- 860 DSPi VoIP RTP Find and Fix
- 860 DSPi VoIP RTP MOS Test
- 860 DSPi VSB
- 860 DSPi Work Orders
- Adding a Macro Shortcut Icon to Your 860 DSPi using WorkBench
- Understanding QAM
- Understanding Return Carrier Noise Measurement
Evolutionary Platform Lets Techs Change with the Times, Without Changing Meters
Trilithic's popular 860 DSP offers a versatile solution for your changing business needs. Thanks to DSP technology, you can update or upgrade it with a simple Internet download. Anytime, anywhere.
Your techs can change with the times - or with new services - without changing meters. That can cange your bottom line. In fact, no other meter gives you lower lifetime costs. With the 860 DSP, you're ready for tomorrow, today.
The 860 DSP is a handheld spectrum analyzer providing all of the testing power needed to insure HFC networks operate to high standards. This includes balancing the distribution system, maintaining analog and digital signal quality, controlling return path ingress and much more.
High Performance Digital Cable Signal Analyzer
Measures Levels
C/N, 2nd and 3rd Order Intermodulation, Forward Gain and Tilt, Reverse Gain and Tilt (with Option), Hum and Low Frequency Noise
5 to 1,000 MHz Frequency Range
Scans all Forward Channels, a Select Group or tunes by Frequency
QPSK, QAM Analyzer
Measures MER/BER, displays Constellations (with option)
High Resolution Spectrum Analyzer
Displays spectrum up to full span, and (with option) at resolutions from 10kHz to 3 MHz
Reverse Path Tester
Emulates Trilithic's Guardian 9580 SSR Return Path Field Unit (with option) and RSVP Installer's Reverse Tester (with option)
860 DSP Options
The 860 DSP is the first high-performance distribution analyzer designed specifically for the demands of HSD and VoIP. More than just a signal level meter, the 860 DSP makes full use of DSP (digital signal processing) techniques to perform a wide array of transmission and signal quality tests, on both analog and digital signals. With options, the capabilities of the 860 DSP can be expanded to include high-resolution spectrum analysis, QAM and QPSK analysis and a wide range of return path installation and distribution tests, all without impacting size, weight or battery life.
The 860 DSP is fully compatible with Trilithic 9580 SST and 9581 SST Reverse Path Analyzers and can emulate the functions of the Guardian 9580 SSR Reverse Field Unit and Guardian RSVP² Installer's Reverse Tester.
DSP: For Today and Tomorrow
The unique architecture of the 860 DSP makes it easy to upgrade and expand over time to meet emerging measurement and data communication requirements. The 860 DSP achieves this adaptability by employing virtual instrument techniques, eliminating much of the analog circuitry of older instruments with cutting-edge digital signal processing (DSP) technologies. The flexibility of DSP means that applications that were not even available when the 860 DSP was originally purchased can be added later, usually by simply downloading firmware from the Internet.
DSP technology also gives the 860 DSP the measurement speed that modern conditions demand, refreshing all-channel displays and performing signal analyzes up to 12 times faster than any other analyzer.
Not only is the 860 DSP the most capable and flexible analyzer in its class: it is also the most cost-effective. The use of DSP reduces reliance on expensive and complex analog circuitry, giving the 860 DSP a starting price no greater than that of some installation meters.
Designed for Convenience, Designed for Durability
As with all Trilithic instruments, the keyboard functions are simple and direct. Buttons are large and widely spaced, making it easy to operate the 860 DSP with heavy gloves. Most measurement or data communication functions can be accessed with a single keystroke, and soft keys simplify navigation through set up and operation menus. Tests and other functions are selected from one of four convenient "desktops." Measurement results and received data are displayed on a high-resolution "4.6 X 3.5" back lit LCD display, and detected audio can be heard through the built-in, waterproof loudspeaker.
Though the 860 DSP has the capabilities of a lab instrument, it is built for rugged, everyday use. The housing is constructed of strong shock-resistant plastic and further protected by an integral rubber boot and padded bag that minimize impact damage and increase water resistance. The 860 DSP weighs only 4 lbs., and a hand strap makes it easy to hold the 860 DSP securely in all conditions with one hand. A shoulder strap allows for hands-free carriage.
For assistance with any installation, please call Trilithic support at 1-800-344-2412.
This firmware is appropriate for most users, but some companies have specific update policies. In some cases the standard firmware may render certain test functions inoperable. Please contact your manager before updating your firmware.
WARNING: If you are upgrading from firmware between v 6.2.1.1 to v 10.4.1.2 you must upgrade to 860 DSPi Firmware v 11.4.1.2 first.
v 12.4.2.2
- Corrected issue with DOCSIS 8x4 modem setup
- Corrected issue with DOCSIS 8x4 modem autotest macro
v 12.2.15.2
- Added Modem channel explanation to type in info menu
- Added option to save and restore presets in the spectrum menu
- Added Burst mode to SSR
- Fixed bug in CM through that kept user from being able to toggle downstream /upstream
- SSR Added reference for bottom graph
- Added Downstream DOCSIS Line to QAM Equalizer
- Added a shortcut for downstream frequencies to be accessed from navigation menu
- Added 2,5,10 db/div in SSR mode
- Added Spectrum .pres to file filter in explorer menu
v 11.12.8.2
- Improved speed upon entering the UP-LD menu
- Improved WiFi login, allow for Com net speed to be set at 100 Mbps
- Reduced DOCSIS 3 8x4 modem booth time by five seconds
- Added DOCSIS 3 8x4 modem firmware version on CMStat menu
- Added DOCSIS 3 8x4 dual modem support
v 11.10.10.2
- New 8x4 DOCSIS modem support.
- Modem login bypass - allows for technicians to press "Enter" to bypass full registration and show modem statistics.
- Upstream EQ - 8x4 can now show pre-equalized taps, group delay and in-channel frequency response.
- Autotest BER update - If you do not check BER in the channel plans, no readings on BER will be taken.
v 11.8.25.2
- WARNING: If you are upgrading from firmware between v 6.2.1.1 to v 10.4.1.2 you must upgrade to 860 DSPi Firmware v 11.4.1.2 first and then upgrade to v 11.8.25.2. The older firmware in this range has a limitation on how big of a flash memory that they can upgrade and this limitation was removed in the v 11.x.x.x releases of firmware. Once you have upgraded to a firmware version from v 11.x.x.x, you will not need to do this double step upgrade again. This applies to WorkBench, TDM and the DOS Console version of the firmwares.
- Increased Long Term BER to 24 Hours as a test, Workbench also supports this functionality.
- Changed spoofing to not allow invalid characters.
- Added some IPv4/IPv6 code, allows the modem to go into IPv4 or IPv6 mode.
- Added ability to force 10Mbps, 100Mbps, or Auto Negotiate for CI-4 and CI-5 support.
- Added code to auto detect 85 MHz or 65 MHz boards.
- Added Chinese Icon support.
- New Spectrum Detector mode – “Burst Detector” available for use.
v 11.4.1.2
- Store the network connectivity mode in CMSTat macro in case you wish to remote view cable modem macro logs over the RJ-45 connection
- QAM macro speed enhanced when channel is below -20 dBmV
- Added dynamic naming to tasks in the task manager for maintenance personnel
- Forced scan mode tilt compensation to use Tilt menu (High / Low) channel selection
- Added Low and High tilt channel labels to scan mode when tilt compensated scan is activated
- Lockout changes in operator / new technician when setup is locked out
- Added parsing to operator name to allow the tech ID number to be included in the field and displayed on boot up
- Added the "X" display and ingress check in RSVP mode to help users determine if carriers are interfered with by ingress
- Added "Outlet" as a selection in the location menu
Euro AC power cable for Trilithic products. This is a Euro standard 2.5 Meter power cable with a Continental Europe 2-prong plug Male (IEC 884/CEE 7/VII) to 3-pin shroud plug Female (IEC 320C13). Can be used to replace the Euro power cable that is included with the following products: 8300 FST (8 MHz Euro DOCSIS), 860 DSPh with Euro Power Supply, 860 DSPi with Euro DOCSIS 2.0 Modem, 860 DSPi with Euro DOCSIS 3.0 Modem, and 860 DSPr with Euro Power Supply. Can be used as an accessory for the following products: CT-2 (CE Approved), CT-3 (CE Approved), 8310 RSA, 860 DSP, 860 DSPh Input Expander, and 9581 SST R3 & 9581 SST R4.
Replacement input F-connectors for the 860 DSP & 860 DSPi. Minimum quantity of purchase is 25 pieces.
Bi-directional test probe used with the Return Sweep Receiver Option (SR-1) for the 860 DSP & DSPi or the 9580 SSR to isolate ingress sources.
Vehicle power adapter for the 860 DSP & 860 DSPi.
Data cable for the 860 DSP & 860 DSPi. This data cable is used to connect to a PC using the WorkBench software.
Precision RF coaxial test cable for connecting test equipment.
Six (6) foot CAT5e ethernet patch cable, 100 Ohm impedance with RJ-45 Male to Male connectors.
Carrying case designed to house an 860 DSPi, leakage detector, power adapter/charger, test cables, probes and more. Includes Precision RF Coaxial Test Cable (I/O-15).
46 MHz Return measurement lowpass filter.
When installed in an 860 DSP or 860 DSPi, this option provides compatibility with the 8300 FST Forward SpeedSweep Transmitter. REQUIRES POWER PACK OPTION.
When installed in an 860 DSPi, this option allows the operator to connect an off air antenna to the 860 DSPi input port and read Level, MER, BER, and view Constellation and Equalizer Tap Information on 8 VSB and 16 VSB channels. REQUIRES FIRMWARE VERSION V7.4.1.1 or HIGHER. Aftermarket purchases require the Enhanced Digital Video Retrofit (IL-2).
Allows headend technicians to view Vertical Interval Test Signals (VITS) and specify lines for testing. The option enables the technician to measure differential phase, differential gain, and chroma delay. REQUIRES POWER PACK OPTION.
When installed in and 860 DSP or 860 DSPi, this Option provides a way to troubleshoot upstream ingress and noise problems within active channel bands by seeing the ingress that is present "underneath" an upstream cable modem channel, or any bursty signal. REQUIRES POWER PACK OPTION FOR 860 DSPi.
When installed in an 860 DSPi, this option extends the measurement and troubleshooting range of field technicians by offering a simple round-trip VoIP quality test from any RF test point. The option works through communication with the Tektronix DirectQuality active monitoring system, enabling tests to verify RTP communication from the test point to probes placed strategically throughout the cable network. This option works only with a fully implemented Tektronix DirectQuality System. REQUIRES FIRMWARE VERSION V8.1.11.1 or HIGHER and POWER PACK OPTION.
When installed in an 860 DSP or 860 DSPi, the Frequency Domain Reflectometer Option (FDR) provides a simple, convenient and accurate tool for determining the distance to cable faults. The option works by sending a sweep into the cable and analyzing the complex reflected wave to determine the distance to various sources of reflection (opens, shorts, splitters, etc.). The reflecting events are indicated on a distance versus amplitude display, and markers are used to identify the distance to the source of the reflection, and the return loss at that point. REQUIRES POWER PACK & RETURN TRANSMITTER BOARD OPTIONS.
When installed in an 860 DSP, this option performs functions of the Trilithic Guardian 9580 SSR Reverse Test Field Unit. Compatible with the Guardian and Guardian II System. REQUIRES POWER PACK & RETURN TRANSMITTER BOARD OPTIONS. This option or the Return Tester RSVP Option (VP-1) is required to enable the Real-Time Transport Protocol Reflector Option (RTP-1).
When installed in an 860 DSPi, this option performs functions of the RSVP². Test capabilities and displays allow RSVP² type testing of 8 frequencies at one time. Compatible with the Guardian and Guardian II System. REQUIRES POWER PACK & RETURN TRANSMITTER BOARD OPTIONS. This option or the Return Sweep Receiver Option (SR-1) is required to enable the Real-Time Transport Protocol Reflector Option (RTP-1).
When installed in an 860 DSPi, this option harnesses the power of the 860 DSPi to provide all of the typical and high performance spectrum analyzer capabilities without the complexity, cost and weight of analog alternatives. REQUIRES POWER PACK OPTION.
With this option the 860 DSP analyzes QPSK and all common QAM formats from 4 QAM to 256 QAM, including deep interleave on 256 QAM, presenting constellation diagrams, MER, EVM and calculated BER, both pre and post FEC.
This is a factory upgrade that includes installation of a 85 MHz Return Transmitter Board (RTB). When installed in and 860 DSPi this option enables signal generation for the Return Sweep Receiver Option (SR-1), Return Tester RSVP Option (VP-1), and/or Frequency Domain Reflectometer Option (FDR). The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic.
REQUIRES POWER PACK OPTION. For aftermarket purchases of this option, you must also purchase the SR-1, VP-1, and/or FDR Option. Requires hardware change at the factory. Call factory for RMA 800-344-2412.
Speeds troubleshooting and maintenance with fast, high-resolution return sweep analysis.
8300 FST is an essential part of the system for comprehensive sweep capability in the 860 DSPi Field Analyzer family.
The 860 DSPr is a rack-mounted and browser accessible remote signal analyzer that is designed to provide continuous access to signal analysis at remote hubs or headends.
The new Trilithic 860 DSPh is the ideal instrument for managing signal quality in remote headends
AC power cable for Trilithic rack-mount units. This is a U.S. standard 6 Foot power cable with a 3-prong grounded plug Male (NEMA 5-15P) to 3-pin shroud plug Female (IEC 320C13). Can be used with the following products; CT-2 & CT-3, 8300 FST (6 MHz US DOCSIS), 8310 RSA, 860 DSP, 860 DSPh, 860 DSPh Input Expander, 860 DSPi with US DOCSIS 2.0 Modem, 860 DSPi with US DOCSIS 3.0 Modem, 860 DSPr, 9581 SST R3, and 9581 SST R4.
Replacement input F-connectors for the 860 DSP & 860 DSPi. Minimum quantity of purchase is 25 pieces.
AC to DC power adapter & battery charger for Trilithic Products. This is a standard AC to DC power supply (90 - 220 VAC) with a U.S. standard 6 Foot power cable with a 3-prong grounded plug Male (NEMA 5-15P) to 3-pin shroud plug Female (IEC 320C13). Can be used to replace the AC to DC adapter & battery charger that is included with the following products: 8300 FST (8 MHz Euro DOCSIS), 860 DSP, 860 DSPh with Euro Power Supply, 860 DSPi with US or Euro DOCSIS 2.0 Modem, 860 DSPi with US or Euro DOCSIS 3.0 Modem, and 860 DSPr with Euro Power Supply.
Set of five (5) clear plastic adhesive shields used to protect the display of the 860 DSP & 860 DSPi.
ACTS server software enables high speed throughput tests using the 860 DSPi with speeds up to 40 Mbps, and can also be used as a ping test reflector.
Trilithic Data Manager (TDM) combines high-performance hardware and powerful software applications to provide a comprehensive solution for managing test data and field analyzer inventory.
Software for the 860 DSP, 860 DSPi, 860 DSPh, and 860 DSPr analyzers and 8300 FST Forward SpeedSweep Transmitter.
This is a factory upgrade that includes installation of a 85 MHz Return Transmitter Board (RTB). When installed in and 860 DSPi this option enables signal generation for the Return Sweep Receiver Option (SR-1), Return Tester RSVP Option (VP-1), and/or Frequency Domain Reflectometer Option (FDR). The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic.
REQUIRES POWER PACK OPTION. For aftermarket purchases of this option, you must also purchase the SR-1, VP-1, and/or FDR Option. Requires hardware change at the factory. Call factory for RMA 800-344-2412.
This is a factory upgrade that installs a DOCSIS 2.0 Modem into the 860 DSP. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic.
Requires hardware change at the factory. Call factory for RMA 800-344-2412.
This is a factory upgrade that installs a DOCSIS 3.0 (4x4) Modem into the 860 DSP. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic.
Requires hardware change at the factory. Call factory for RMA 800-344-2412.
This is a factory upgrade that includes a replacement of the Digital Video Board (IL-1) of the 860 DSP or 860 DSPi with an Enhanced Digital Video Board (IL-2). The Enhanced Digital Video Board (IL-2) adds deep interleave support to the Impulse BER function and extended measurements of errored seconds and code word errors in the QAM Option (QA-2). The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic.
REQUIRES POWER PACK OPTION. This option is required to enable the Vestigal Side Band Modulation Option (VSB). Recently shipped 860 DSPi’s already have the Enhanced Digital Video Board (IL-2). Requires hardware change at the factory. Call factory for RMA 800-344-2412.
This is a factory upgrade that includes a replacement of the RF Printed Circuit Board (PCB) of the 860 DSP & 860 DSPi to extend the device measurement frequency range to 1 GHz.. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic.
Requires hardware change at the factory. Call factory for RMA 800-344-2412.
This is a factory upgrade that includes an upgrade of the Ethernet Communications Interface (CI-1, CI-2, CI-3, or CI-4) of the 860 DSP or 860 DSPi to an Ethernet Communications Interface (CI-5). The Ethernet Communications Interface (CI-5) adds 10/100 Ethernet connectivity and WiFi compatibility to the 860 DSP or 860 DSPi allowing connection to the Internet through an external cable modem and enabling the High Speed Throughput Test feature. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic.
Requires hardware change at the factory. Call factory for RMA 800-344-2412.
This is a factory upgrade that includes a replacement of an existing Ethernet Communications Interface (CI-1, CI-2, CI-3, or CI-4) in the 860 DSP or 860 DSPi with Ethernet Communications Interface (CI-5) and a WiFi (802.11 b/g) adapter. The WiFi adapter test modes include a survey that provides a list of access points within the range of the meter, along with field strength, status of security and SSID, channel and type, and MAC address. Additionally, the adapter can be used to connect to any authorized access point for communication of measurement data, meter configuration, or access to Internet web sites for work order close-out or other productivity improving functions. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic.
Requires hardware change at the factory. Call factory for RMA 800-344-2412.
This is a field upgrade that includes an onsite replacement of the Digital Video Board (IL-1) of the 860 DSP or 860 DSPi to an Enhanced Digital Video Board (IL-2). The Enhanced Digital Video Board (IL-2) adds deep interleave support to the Impulse BER function and extended measurements of errored seconds and code word errors in the QAM Option (QA-2). The complete field upgrade package includes: all necessary hardware, software, and calibration (if needed) performed onsite.
This is a field upgrade that includes an onsite replacement of the RF Printed Circuit Board (PCB) of the 860 DSP & 860 DSPi to extend the device measurement frequency range to 1 GHz. The complete field upgrade package includes: all necessary hardware, software, and calibration (if needed) performed onsite.
This is a field upgrade that includes an onsite upgrade of the Ethernet Communications Interface (CI-1, CI-2, CI-3, or CI-4) of the 860 DSP or 860 DSPi to an Ethernet Communications Interface (CI-5). The Ethernet Communications Interface (CI-5) adds 10/100 Ethernet connectivity and WiFi compatibility to the 860 DSP or 860 DSPi allowing connection to the Internet through an external cable modem and enabling the High Speed Throughput Test feature. The complete field upgrade package includes: all necessary hardware, software, and calibration (if needed) performed onsite.
This is a field upgrade that includes an onsite replacement of an existing Ethernet Communications Interface (CI-1, CI-2, CI-3, or CI-4) in the 860 DSP or 860 DSPi with Ethernet Communications Interface (CI-5) and a WiFi (802.11 b/g) adapter. The WiFi adapter test modes include a survey that provides a list of access points within the range of the meter, along with field strength, status of security and SSID, channel and type, and MAC address. Additionally, the adapter can be used to connect to any authorized access point for communication of measurement data, meter configuration, or access to Internet web sites for work order close-out or other productivity improving functions. The complete field upgrade package includes: all necessary hardware, software, and calibration (if needed) performed onsite.
Repairs
All repairs carry a 90-day warranty against defects in replacement parts and repair workmanship.
Products
All Trilithic products are warranted against defects in materials or workmanship for a minimum of one year after shipment to the original purchaser.
Trilithic's obligation under this warranty is limited to the repair or replacement of the product after being returned to our factory, and Trilithic determining the product be indeed defective.
This is Trilithic's sole warranty and is given in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for a particular purpose and sets forth the buyers sole remedy.
The following products carry a Manufacturer's One Year Warranty
| 8821Q, 8821Q-R & 8853Q | Rotary & Benchtop Attenuators | TFS-FS1 |
| APSS-1B | TFS-201 | TFS-FS1K500 Series |
| DCVF-5 | TFS-290 Series | TLB-60 |
| Impedance Matching Pads | TFS-301 | Tunable Filters |
| I-Stop | TFS-401 | VF-4 & VF-5 |
| MetroNet 5020, 5100, 5120 & 5200 | TFS-2000 Series | |
| Programmable RF Switches | TFS-3200 Series |
The following products carry a Manufacturer's Two Year Warranty
| 860 DSP & 860 DSPi | 9581 SST R3 & 9581 SST R4 | RSVP² |
| 860 DSPh & Input Expander | 9581 TPX | Seeker Lite² |
| 860 DSPr | CT-2/ CT-3 | Seeker |
| 8300 FST | Model Two | Seeker MCA |
| 8310 RSA | Model Three | Seeker BB-2 |
The following products carry a Dell Three Year Warranty
All Specially Configured Dell PowerEdge 2U Rack Mount Server products are warranted against defects in materials or workmanship for a minimum of three years after shipment. Dell provides next business day, parts and labor, on-site response for the following Trilithic products.
| ADIA Integrated Server Package | LAW Server Package |
| Guardian II Integrated Server Package | Trilithic Data Manager (TDM) Integrated Server Package |